EV300
EV300
EV300
+
  • EV300
  • EV300
  • EV300

EV300

Rated load : 4000kg

Correo Electrónico:

Still deciding? Get samples first,  Contáctenos !

View Productoos Similares

  • Description
  • Technical Especificaciones

    Modeloo EV300
    Rated Load Capacidad 300kg
    Overall Dimensiónes 1408*740*965
    Turning Radius 1.5m
    Curb Peso 170kg
    Bucket Capacidad (m³) 0.23m³
    Operating Time (h) 4h
    Charging Time 5-6h
    Charging Voltage 220V/50Hz
    Gradeability 15°
    Battery Fabricante Tianneng
    Battery Modeloo 48V20ah
    Motor Potencia 700W
    Gear Ratio 1:28
    Tire Tamaño (Front) 4.00-10
    Tire Tamaño (Rear) 4.00-8
    Tire Pressure 0.25 MPa
    Forward Speed (High) 15 km/h
    Forward Speed (Medium) 12km/h
    Forward Speed (Low) 9km/h
    Reverse Speed 6km/h

     

    Getting Started 

    1. Turn on the Potencia switch, engage forward gear, and gently apply throttle to move forward.

    2. Upon reaching the destination, lift the unloading handle to complete unloading.

    3. Shift to reverse gear, apply throttle, and return to the designated position.

    4. Strictly avoid overloading during operation.

    5. When riding with the hopper loaded, ensure the hopper contains cargo. Riding with an empty hopper may cause tire slipPágina.

    6. Monitor battery level constantly. Recharge promptly when below 30% to extend battery lifespan.

     

    Maintenance and Operation Manual

    To prevent injury to yourself and Otross, strictly adhere to the following safety instructions:

    Maintenance and inspections shall be performed in accordance with the following proVisións:

    1. The maintenance, lubrication, and inspection schedule for the 04DUMPER vehicle must be strictly followed.

    2. Before leaving the 04DUMPER vehicle, perform the following actions:.

    ● Do not park on slopes..

    ● Engage the electric lock..

    ● Disconnect the Potencia supply for extended parking periods.

    3. Before operation:.

    ● Load Capacidad must not exceed 400kg..

    ● Climbing slope must not exceed 10 degrees..

    ● Operator must be in the designated operating position..

    ● Control lever must be in neutral position..

    ● Verify normal functioning de speed control, steering, and braking systems before operation.

    4. Braking, steering, control, and safety devices must undergo regular inspection and maintenance to ensure optimal condition.

    5. The electrical system should be inspected periodically based on usage conditions.

     

    Battery Maintenance Precautions

    1. When operating an electric vehicle, it is Mejor to recharge the battery after it has been used up to approximaTely 70% de its Capacidad. Avoid waiting until the battery is compleTely depleted before recharging. If the battery does become fully discharged, turn def the Potencia immediaTely. Do not attempt to use the battery's “voltage recovery” function to force the vehicle to continue running, as this may cause “over-discharge” and shorten the battery's lifespan. (For 48V electric assist bikes, the minimum battery protection voltage is 46V)

    2. When storing an electric vehicle long-term, fully charge the battery beforehand. Never store it in a discharged state for extended periods.

    3. If charging exceeds 10 hours without the charger indicator switching or the battery overheats, immediaTely sMejor charging and Contactoo battery after-sales service. Never continue charging if the charger indicator fails to switch.

    4. Battery Capacidad is rated at 25°C ambient temperature. Capacidad decreases by 1% for every 1°C drop in temperature. Account for ambient temperature effects during use.

    5. Avoid using the battery in environments below -10°C (-14°F).

    6. Batteries are consumable items. After repeated charge-discharge cycles, Capacidad will gradually decrease, reducing the electric vehicle's range. This is normal. However, if Capacidad drops below 60% de the standard value within the warranty period, the battery is considered defective. Contactooo us promptly. After the warranty period expires, Capacidad reduction below 60% de the standard value is considered normal wear and tear and is not covered under warranty.

    7. The battery has a lifespan de 400 charge/discharge cycles or 3 Años.

    8. Batteries used beyond their warranty period should be Enviarted to our prdeessional maintenance personnel for a comprehensive inspection. They may only be used again after confirming no safety hazards exist.

    9. The electrolyte inside the battery is a highly corrosive acid solution. Avoid splashing it onto skin or clothing. If Contactoo occurs with skin or eyes, immediaTely rinse with copious amounts de water. Seek medical attention for severe cases.

    9. Dispose de end-de-life batteries through authorized recycling stations (retailers). Do not discard them indiscriminaTely.

Packaging for shipment

Packing and Shipping

Customer Visits

Customer Visits
Customer Visits
Customer Visits
Customer Visits
Customer Visits
Customer Visits

Client Testimonials

Client Testimonials

EV300

Rated load : 4000kg

Correo Electrónico:

Still deciding? Get samples first,  Contáctenos !

Productooos Category

Certificaciones

undefined
Hydraulic Excavator CE Certificate
undefined
Concrete Mixer Truck CE Certificate
undefined
Forklift CE Certificate
undefined
Loader CE Certificate
undefined
ISO9001
undefined
CE Certificate for Excavators
undefined
Loader CE Certificate
undefined
Titan CE Certificate of Mini Dumper
undefined
Australian Rising Star Award
undefined
Noise Directive Certificate
undefined
Noise Directive Certificate

FAQs

Where is your Fábrica?

The Fábrica de Katz Máquinas Co. Ltd is in Qianyatou village,Mihe town,Qingzhou city,a long Historia dity with beautifulscenery and rich culture.

There are our Deicina Direcciónes also:

1:No .190-1 Wenhua WestRoad,Weihai City.

2:No .357 Songlin Road,Pudong NuevoArea,Shanghai.

3:Qianyatou Village,MiheTown,Qingzhou City.

What Certificados do you have?

Calidad MANAGEMENT SYSTEM CERTIFICATION:GB/T19001-2016/MS09001:2015

CE CERTIFICATION

NOISE TECHNICAL CONSTRUCTION FILE

MSDS FOR BATTERY

SABER CERTIFICATION

Can I get some samples?

Free sample is not available,and the minimum order quantity is one set.

Are you a Fábrica or a trading Empresa?

We are an integrated Producción and sales Empresa,and both our Producción and sales Equipos have over 21 Años de experience.

What is the MOQ de the Producto and what is the Producción lead time after ordering?

MOQ is 1,and the Producción lead time depends on the quantity de Productoos ordered and is usualy around 15-30 Días.

What are the payment options?

T/T payment is preferred,Otros payment methods are also accepted,payment Términos:30% advance payment,70% balance payment.

Related Productoo

Katz Machines - Maquinaria Pesada para América Latina

Need help? We're here to help!

24-hour online service

We support free samples

Calidad Guarantee

Enviar